Honeywell HXMT9, Руководство по установке

Страница: 6 / 102

11. POWER CORDS
12. HEED WARNINGS
13. LIGHTNING
14. OVERLOADING
15. OBJECT AND LIQUID ENTRY
16. SERVICING
17. DAMAGE REQUIRING SERVICE
18. REPLACEMENT PARTS
19. SAFETY CHECK
20. FIELD INSTALLATION
– Do not allow anything to rest on the power cord. Do not
locate unit or equipment where the cord can be damaged by persons
walking on it.
– Follow all instructions marked on the unit.
– During lightning storms or when the unit will be left
unattended and unused for long periods, unplug the unit and associated
equipment from the wall outlet. This will prevent damage to the video
equipment caused by lightning and power-line surges.
– Do not overload wall outlets and extension cords as this
can result in a risk of fire or electric shock.
– Never push objects of any kind into the
unit through openings as they may touch dangerous voltage points or short
out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
– Do not attempt to service the unit as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
– Unplug the unit and equipment from the
wall outlet and refer servicing to qualified service personnel under the
following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid has spilled, or objects have fallen into the unit.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally when following the operating
instructions, adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the unit to its normal operation.
E. If the unit has been dropped or the cabinet damaged.
F. When the unit exhibits a distinct change in performance, this indicates
a need for service.
– When replacement parts are required, be sure
the service technician uses replacement parts specified by the
manufacturer or that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other
hazards.
– Upon completion of any service or repairs to the unit,
ask the service technician to perform safety checks to determine that the
video product is in proper operating condition.
– Installation should be performed by a qualified
service person and should conform to all local codes.
vi