5
WEEKLY CLEANING (continued)
Scale Removal directions:
Disinfecting directions: Disinfect following scale removal
Follow steps 5 through 8 from
the scaling section.
NOTE: USING MORE THAN 1
TSP (5 mL) OF BLEACH PER
GALLON (3.75 L) OF WATER
WILL RESULT IN DAMAGE TO
YOUR HUMIDIFIER.
Add 1 Tsp (5 mL) of bleach to 1 gallon
(3.75 L) water. Add up to 1/4 gallon (0.90 L)
of water/bleach solution to water reservoir of
the main housing.
1 - Add Bleach
Note: Please be careful of clothing, rugs and other non bleach resistant materials when
disinfecting. Spilling bleach on clothing, rugs and certain surfaces may cause damage.
+
6 - Soak & Scrub
Soak heating element
for 15-20 minutes then
gently scrub with a soft
brush to remove mineral
deposits.
Do not use steel wool or
other harsh abrasives as
it will remove the coating
from the heating element
or damage the heating
element.
8 - Rinse
After 20 minutes
thoroughly rinse unit and
parts until smell of the
solution is gone.
7 - Wipe
Gently wipe top if you do
not use dishwasher.
5 - Place in Solution
Place mist chimney,
mist dome and float in
solution or follow the
dishwasher option.
1 - Remove
Remove top cover, mist
dome, mist chimney
and float.
1- Remove float by pulling
up gently on red tab.
2- Remove mist chimney
/mist dome assembly by
pushing back on the red
tab and pulling up.
2 - Remove
3 - Disassemble
Disassemble mist
dome / mist chimney
by turning counter
clockwise.
Fill water reservoir and
heating chamber with
1 cup (250 mL ) of
vinegar.
4 - Fill with Vinegar
1
2
Turn Power Off, Unplug Unit and allow to cool for 20-30 minutes before beginning cleaning process.
