Honeywell HWC-D101, Руководство пользователя

Страница: 5 / 8

5
Connection
1. Remove the dome cover
After determining the place to be installed, remove the dome cover with the wrench in the
package.
(It is assumed that the power and network connector are installed.)
2. Connect the network
Connect the RJ45 jack from the network device to the Ethernet connector of the product.
(If the PoE device is used, confirm that the network devices and cables are the products by
IEE802.3af.)
3. Connect the power
Connect the power of a DC 12V 1A adaptor
(If a PoE device is used, it is not necessary to connect the power.)
4. Fix the product
Fix the product on the mounting surface after connecting the cables.
5. Setup an IP address
Refer to p.7~8 (Network)
6. Adjust the camera module
Adjust the direction of the camera module with monitoring the image
on the web monitoring page.
(The lens focus cannot be adjusted.)
7. Assemble the dome cover
Assemble the dome cover with the wrench and remove the vinyl on the cover.
▶
Fixing Hole
(Bottom)
Fixing Hole (4EA)