Honeywell HW4000 - Portable Generator NOT, Руководство пользователя, Страница: 20 / 88

Starting Generator
14 www.honeywellgenerators.com HW4000/HW4000L Portable Electrical Generator Owner’s Manual
Starting Generator
1.
Place generator outside in a well-ventilated area.
2.
Confirm the circuit breakers are set.
3. Turn fuel shut-off valve to ON position.
4.
Pull choke control to ON position.
5.
Press engine control switch to RUN position.
6.
Grip recoil starter handle and pull slowly until you feel
slight resistance.
7.
Apply a swift pull to start the engine and carefully
return the recoil starter handle to its original position.
This may need to be repeated 2-3 times until the
engine starts.
8.
As engine warms up, and RPM stabilizes, gradually
push choke control to OFF position.
Thoroughly read and understand all information
provided in this Owner’s Manual before operating
generator.
NOTICE
It is very important to maintain proper level of engine oil to
keep engine in good running condition.
• Check engine oil level prior to each use.
Starting generator with appliances connected can cause
permanent damage to appliances.
• NEVER start generator with electrical appliances
plugged in and turned on.
NOTICE
Keep the generator at a minimum of 6 feet (2 meters) from
any building, object, or wall.
FIGURE 17: Circuit Breaker Position
FIGURE 18: Fuel Shut-off Valve — ON/OFF Position
FIGURE 19: Choke Control
WARNING
Set Tripped
Set Tripped
ON
OFF
FIGURE 20: Engine Control Switch
FIGURE 21: Recoil Starter Handle
NOTICE
NEVER allow the starter grip to snap back against the
engine. Return it gently to prevent damage to the starter.
NOTICE
If engine will not start, move the choke to the OFF position
to reduce fuel to the engine.
RUN
ENGINE
STOP