ASSEMBLY INSTRUCTIONS
• Remove the packaging
material from the Fan
Control Box.
• Remove the holding
screw from the rear of
the Fan Control Box
(Fig. 1).
• Push the Fan Control
Box Extension through
the opening in the right
leg of the fan base
(Fig. 1).
Fig. 1
FAN
CONTROL
BOX
HOLDING
SCREW
• Replace the holding
screw and firmly tighten
the Fan Control Box onto
the base (Fig. 1).
NOTE: When installing
the Control Box, make
sure the electrical wires
are located on the out-
side of the base (Fig. 1).
OPERATION
• Set your fan on a level,
dry surface.
• Plug the power cord
into a polarized 120 volt
AC wall outlet.
• Select the desired
speed for your needs. For
maximum air circulation,
you may point the fan
towards the ceiling.
Using this method during
the summer and winter
will move the warm air
from the ceiling, dispers-
ing it and giving you a
more uniform room tem-
perature.
• Adjust the pivoting head
to direct the powerful
breeze where desired.
• Turn the Control to OFF
and UNPLUG THE FAN
BEFORE CLEANING.
• Use only a soft, damp
cloth to clean the fan.
• DO NOT immerse the
fan in water and never
allow water to drip into
the Motor Housing.
• DO NOT use gasoline,
paint thinner or other
chemicals to clean the
fan.
• To clean the Fan Blade,
use 2 screwdrivers to
disengage the 8 hooks
holding the Front Grille to
the Rear Grille (Fig. 2).
• Remove the Front Grille.
• Wipe the Blade and
Grilles.
CLEANING AND STORAGE
• Reassemble the fan by
snapping the Front Grille
into place.
DW-518 Fig. 2
Fig. 2
