Honeywell HRXD16, Руководство пользователя

Страница: 74 / 156

Configuration
74
When the DVR is in the Event Record mode it is possible to have it record images
before the event occurs. The
Pre-Event screen allows you to define how to handle
pre-event recording.
2. You can turn individual cameras On or Off for pre-event recording. The image
speed can be set from
0.10 to 30.00 ips (25.00 ips PAL), and image quality can be
selectable from Very High , High , Standard and Low .
3. You can set the amount of time to record prior to the event by adjusting the Dwell .
You can set the Dwell from 5 seconds to 30 minutes. The longer the dwell set, the
fewer maximum ips can be set.
Note When the DVR is in the Time or Time & Event mode, it ignores
the pre-event settings and follows the time settings.
4. You can save your changes by highlighting Save and pressing . Selecting
Cancel exits the screen without saving the changes.
Archive Screen
1. Highlight Archive in the Record menu and press , and the Archive setup
screen ( Figure 3-53 ) appears.
Figure 3-53 Archive Setup Screen
2. Highlight Archive On and press to toggle between On and Off .
Note If you have not set up a storage device for archiving, a message
appears notifying you of this.
3. Select the Days and Time Range you want archived.