Honeywell HRSD40F, Руководство пользователя

Страница: 51 / 168

Document 800-03097 Rev C 51
03/09
Configuration
Adding Groups and Users
Highlight User in the System menu and press . The User setup screen appears.
Figure 3-16 User Setup Screen
The User setup screen displays the authorized groups and users. You can add and
delete groups and users. When adding a group, you can assign authority levels to the
group.
Adding a Group
1. Select + Group , then press . The New Group window appears.
Note When the storage condition is
Bad
, the Event Status Storage screen displays
so you can check the storage condition for details. After the
Bad
message
has appeared, replacing the hard disk drive is recommended, usually within
24 hours.
Note Temperature and S.M.A.R.T. monitoring Information is available only for
internal hard disk drives that support the S.M.A.R.T. monitoring program.
Format...
Not Formatted
displays in the upper part of the Format... field
if the hard disk drive has not been formatted.
Highlight
Format... , then click to format the storage device
for recording.
Table 3-4 Storage Screen Setup Fields
Field Information
Select + and click to
expand the user group.
Select - and click to
collapse the user group.