Honeywell HRSD16, Руководство пользователя

Страница: 83 / 176

Configuration
Document 800-03650 Rev D 83
02/09
Figure 3-55 Alarm-In Actions 2 Screen
Selecting PTZ Presets
You can preset the position for each PTZ camera or where you want each PTZ camera
to move whenever the DVR detects an input on the associated alarm input.
1. Highlight the desired field under the PTZ heading, and press . A list of PTZ
cameras appears.
2. Decide which camera you would like to associate with that Alarm-In input, and
then set the preset by highlighting the field for that camera in the Preset column.
Press
to open a list of Presets.
3. Scroll through the list using the UP and DOWN arrows, and then press to
select the preset.
4. Select the PTZ preset from the list.
Associating Spot Monitors with Cameras
A Spot monitor can be associated with a camera. The DVR displays the associated
camera on the Spot monitor whenever it detects input on the associated alarm input.
1. Highlight the desired field under the Spot Monitor heading, and press . A list
of Spot monitors and cameras appears.
2. Select from the lists of spot monitors and cameras.
3. Select OK and press to accept the changes.
4. Save your Alarm-In changes by highlighting Save and pressing . Select
Cancel to exit the screen without saving the changes.