manualshive.com logo in svg

Honeywell HRG16, Руководство пользователя

Поделиться
Скачать
Honeywell HRG16 Скачать руководство пользователя страница 102

102  |  Performance Series DVR User Guide

www.honeywellvideo.com

4. Click 

OK

 to start the initialization process. 

After the HDD has been initialized, the status of the HDD will change from 

Abnormal

 to 

Normal

.

Setting HDD Groups

Your HRG DVR can separate multiple HDDs into groups. Video from specified channels can be 
recorded to a particular HDD group.

To set up an HDD group:
1. Click 

Menu

 

 

HDD

 to enter the HDD Management menu.

2. Select the HDDs to be added to the group.
3. Click 

Group

 to enter the Group Settings menu (see 

Figure 11-1

).

4. Set the HDD Group Number (see 

Figure 11-2

).

Figure 11-2 HDD Group Settings Menu

5. Click 

OK

 to save settings and exit the Group Settings menu.

Note

By default, all HDDs belong to Group 1.

Setting HDD Status

You can change the behavior of your HDD by changing its status. The status of a HDD can be 
set to read-only or read/write (R/W).

Setting an HDD to Read-Only

A HDD can be set to read-only to avoid important recorded files from being overwritten when 
the HDD becomes full.

To set a HDD to read-only:
1. Click 

Menu

 

 

HDD

 to enter the HDD Management menu.

2. Select the HDD to be protected.

Содержание HRG16









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды