Honeywell HREP216, Руководство пользователя

Страница: 94 / 200

94 | Performance Series HREP2 DVR User Guide
www.honeywell.com/security
2. Drag the mouse to resize the cell or use the on the

,

,

, and

buttons to move to
the cell, then press ENTER .
3. Select a desired alarm output mode (see Figure 4-46 ).
• ON : The alarm output is always turned on.
• OFF : The alarm output is always turned off.
• EVENT : Trigger the alarm output in sync with the event.
4. To copy the schedule to another day, click COPY SCHEDULE TO . The Copy Schedule
dialog box opens (see Figure 4-47 ).
5. Check the checkbox of the date that you want to copy the schedule to (see Figure 4-47 ).
Figure 4-47 Copying a Schedule
6. When finished, click OK to copy the schedule.
7. To apply the change, click APPLY at the bottom of the screen.
8. When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
Event Notification
Specify the methods of notification such as buzzer, video popup or email if an event occurs.
1. From SYSTEM SETUP

EVENT , select EVENT NOTIFICATION .
2. Use the

,

,

, and

buttons on the remote control or use the mouse to select one
from BUZZER , DISPLAY and EMAIL .
3. Use the

,

,

,

, and ENTER buttons on the remote control or use the mouse to set
the output method and duration.
4. To apply the change, click APPLY at the bottom of the screen.
5. When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.