Honeywell HREP216, Руководство пользователя

Страница: 73 / 200

800-15802 - A - 12/2013
System Setup | 73
3. To apply the change, click APPLY at the bottom of the screen.
4. When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
Buzzer Options
You can set to output the buzzer if you manipulate the remote control.
1. From SYSTEM SETUP

AUDIO , select BUZZER (see Figure 4-22 ).
Figure 4-22 Buzzer Options Screen
2. Use the

,

,

,

, and ENTER buttons on the remote control or use the mouse to
select an item that you want to edit.
REMOTE CONTROLLER : specify the output of a beep when you press a button on the
remote control.
3. To apply the change, click APPLY at the bottom of the screen.
4. When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
User Settings
You can configure the settings regarding user management and user and group permissions.