Honeywell HREP216, Руководство пользователя

Страница: 187 / 200

800-15802 - A - 12/2013
A
Specifications A
Table A-1 HREP2 DVR Specifications
Category Item 4-Channel 8-Channel 16-Channel
VIDEO
INPUT SIGNAL NTSC/PAL NTSC/PAL NTSC/PAL
MAIN MONITOR VGA/HD VGA/HD VGA/HD
SPOT OUT
Sub monitor (Digital)
2 CH
Analog 1 CH (1 V p-p
@ 75 ohms), Sub
monitor (Digital)
Analog 1 CH (1 V p-p
@ 75 ohms), Sub
monitor (Digital)
LOOP THROUGH
Software controlled
termination / 4 CH (1
V p-p @ 75 ohms) for
ANF3G-H 0412
Software controlled
termination (TBD) Software controlled
termination (TBD)
MOTION DETECTION YES YES YES
AUDIO
INPUT SIGNAL
4 CH (10,000 ohms,
2.8
V p-p)
4 CH (10,000 ohms,
2.8
V p-p)
4 CH (10,000 ohms,
2.8
V p-p)
OUTPUT SIGNAL
1 CH (600 ohms, 2.8
V p-p)
1 CH (600 ohms, 2.8
V p-p)
1 CH (600 ohms, 2.8
V p-p)
CODEC G.711 G.711 G.711
RECORDING
CODEC H.264 HP H.264 HP H.264 HP
REC. RATE
Up to 120 FPS /
100 FPS @ 960H Up to 240 FPS /
200 FPS @ 960H Up to 480 FPS /
400 FPS @ 960H
Up to 120 FPS /
100 FPS @ D1 Up to 240 FPS /
200 FPS @ D1 Up to 480 FPS /
400 FPS @ D1
Up to 120 FPS /
100 FPS @ 2CIF Up to 240 FPS /
200 FPS @ 2CIF Up to 480 FPS /
400 FPS @ 2CIF
Up to 120 FPS /
100 FPS @ CIF Up to 240 FPS /
200 FPS @ CIF Up to 480 FPS /
400 FPS @ CIF
REC. RESOLUTION CIF, 2CIF, D1, 960H CIF, 2CIF, D1, 960H CIF, 2CIF, D1, 960H
ALARM I/O
ALARM INPUT
4 CH, Pulled up to 5 V
via 10,000 ohms 4 CH, Pulled up to 5 V
via 10,000 ohms 4 CH, Pulled up to 5 V
via 10,000 ohms
ALARM OUT
2 CH, RELAY
(5 V, 35 mA) 2 CH, RELAY
(5 V, 35 mA) 2 CH, RELAY
(5 V, 35 mA)