3
REVERSE OSMOSIS FILTRATION SYSTEM
This Reverse Osmosis (RO) filtration system
removes dissolved solids and organic matter from
water by passing it through a membrane which
separates and flushes minerals and impurities
from the water.
Install this system upstream of the steam
humidifier’s water inlet. It is recommended that
the RO system’s filters be replaced at least once
per year to ensure optimal humidifier
performance.
PARTS INCLUDED
•
RO System Assembly
(Model HM600XROF1/U)
–
RO manifold assembly
–
Supply tubing
(one 20 ft. long, 1/4” dia. white tube)
–
Adapter elbow (3/8” x 1/4”)
–
Drain line
(one 6 ft. long,1/4” dia. red tube)
–
Mounting screws and washers
–
Plug Fitting
•
Water Filters
–
#1 - Sediment filter
–
#2 - Reverse osmosis filter
–
#3 - Staging tank
TOOLS NEEDED
•
Crescent wrench
•
Philips screwdriver
OTHER REQUIREMENTS
•
If the RO filtration system or the humidifier is installed in finished space or above ceilings, it is required
to install a water drip pan with a shutoff sensor under all water connections.
See steam humidifier manual, Appendix C.
SAFETY GUIDELINES
•
Read, understand and follow all steps, guides
and requirements before installing the Reverse
Osmosis (RO) filtration system.
•
All water connections must comply with local
and state plumbing and sanitation codes.
Reference, understand and comply with all
governing codes before installing the RO
filtration system.
•
Do not install on hot water supply. Only use
cold water supply.
•
Do not install outside or in unconditioned space
where there is potential for the water system to
freeze.
