OPERATION
• Ensure the air purifier is plugged into a
working electrical outlet.
• Press the power button (
) once. The unit
will start at high speed (Fig. 3).
• Press the power button again to select a different
cleaning level. A LED light will illuminate to indicate
which cleaning level you have selected.
(III = High, II = Medium, I = Low)
Portable air purifiers are more effective in rooms
where all doors and windows are closed. In general,
it is recommended that you run your air purifier
while you are at home to clean the air.
Fig. 3
YOUR AIR PURIFIER
SET-UP
• Select a firm, level and flat location. For best airflow, locate the unit 3 feet (1 M) from any wall or
furniture.
• When operating, large volumes of air are drawn toward the air purifier. Surrounding areas should be
cleaned and/or vacuumed frequently to prevent build-up of dust and other contaminates. This may
also help prolong the life of the filter. If the unit is placed on a light colored carpet, a small mat or rug
should be used underneath to prevent permanent staining. This is especially important in homes with
contamination from smoking or fireplaces.
Control Panel
Replaceable
HEPA-Type Filters
with
Built-In Carbon
Activated Pre-filter
(2)
Rear
Grille
Unit
Rear
2
3
This model air purifier incorporates a 2-stage cleaning
system to help clean the air that passes through the
filter in the unit (Fig. 1).
Stage 1:
Carbon Activated Pre-filter layer traps larger
particles and household odors*
Stage 2:
HEPA-Type filter captures up to 99% of
microscopic particles, as small as 2 microns*
*
From the air that passes through the filter
Dirty
Room Air In
HEPA-Type Filter
*
Odor Absorbing
Pre-Filter
2-Stage Filter System
Cleaner Air
Out
Fig. 1
HOW YOUR AIR PURIFIER WORKS
ENERGY STAR
®
This product earned the ENERGY STAR
®
by meeting strict energy efficiency guidelines set by
the US EPA. US EPA does not endorse any manufacturer claims of healthier indoor air from
the use of this product.
The energy efficiency of this ENERGY STAR
®
qualified model is measured based on a ratio
between the model’s CADR for Dust and the electrical energy it consumes, or CADR/Watt.
INSTALLING HEPA-TYPE FILTERS
The HEPA-Type Filters with built-in pre-filter are supplied
within the air purifier. They are wrapped to ensure
purity.
• Turn-off and unplug the air purifier. While pressing
on the notches along the rear grille, pull the grille
towards you and remove it (See Fig. 2). Gently push
along the edge of the filter frame and pull forward. If
replacing used filters, you may pull the black ribbon
tabs to remove the filter. Repeat for the second filter.
• Remove protective wrap from the filters.
• Place back into the air purifier housing with black
side facing out towards the rear grille and snap
rear grille into place.
Fig. 2