Honeywell HEN04102, Руководство пользователя

Страница: 80 / 180

www.honeywell.com/security
80 | Performance Series Full PoE Network Video Recorder User Guide
Note If the NVR fails to retrieve the configuration information for your selected
camera/channel, then you should navigate to a different window (such as
Snapshot or Overlay ), then navigate back to the Encode window.
3. Configure the following settings for the primary stream and secondary stream:
4. Click Apply to save your settings.
5. To copy the settings to one or more additional cameras, follow these steps:
a. Click Copy .
b. Click the specific camera(s) to which you want to copy the settings, or click All to
select all the cameras, and then click OK .
6. If you want to save your settings and exit the SETTING menu, click OK .
Configuring Snapshot Settings
To configure a camera’s snapshot settings
1. In the SETTING field in the Main Menu , go to REMOTE> Video&Audio > Snapshot .
• Code Stream
Type Set the primary stream type as Regular , MD (Motion Detection), or
Alarm . The secondary stream type is not configurable.
• Compression This setting is not configurable.
• Resolution Set the primary stream to one of the following resolutions: 1080P ,
720P , 960H , D1 , HD1 , 2CIF , or CIF . Set the secondary stream to
one of the following resolutions: D1 , CIF , or QCIF .
Note NVRs can detect a connected 1080p or 720p IP camera's
resolution as
1080P or 720P automatically. Manually set
960H or lower resolution for analog cameras and for 1080p
IP cameras switched to SD mode.
• Frame Rate Select a value between 1 and 30 (NTSC) or 1 and 25 (PAL).
• Bit Rate Type Set to CBR (constant bit rate) or VBR (variable bit rate).
• Quality If the bit rate type is set to VBR , select a value between 1 and 6 .
Note If your device is connected to the NVR through ONVIF, then
you can not select
VBR . If your device is connected to the
NVR through a private protocol, then you can select either
CBR or VBR .
• I Frame Interval Set to 1 S or 2 S .
• Bit Rate Set to a value within the Reference Bit Rate range. To enter a bit
rate that does not appear on the list, click Customized .
• Audio/Video Select or clear the check boxes to enable or disable audio and/or
video.