Honeywell HDZ30A, Руководство пользователя

Страница: 70 / 114

www.honeywell.com/security
70 | HDZ Series Analogue PTZ User Manual
Note The tilt and zoom values of the start and end points will be recorded and fixed for
the selected Autopan line.
Setting the Autopan Direction
The DIRECTION setting of the HDZ Series Camera sets the direction the camera will pan. The
dome will start to pan clockwise from the start point to the end point if your selection is RIGHT ,
and then return to the start point. The dome will start to pan counter-clockwise from the start
point to the end point if your selection is
LEFT , and then return to the start point. Refer to
Figure 4-20 below.
Figure 4-20 Pan Direction in Relation to Dome Movement
Setting the Autopan Speed
The SPEED option is used to define the rotation speed of the Analogue PTZ Dome while running
an autopan path. The speed is adjustable from 1 to 4 (10 ~ 45 degree/sec.).
Running an Autopan Path
After all settings related to the Autopan path are completed, select RUN AUTOPAN to execute
the selected Autopan. Press the IRIS+ key ( ENTER ) to run the selected Autopan line (see
Selecting an Autopan Line on page 69 for more information about selecting the Autopan to run).
Note Users can also execute the Autopan path through a keyboard/controller. Please
refer to the keyboard’s documentation for more information about executing PTZ
keyboard commands.
Deleting an Autopan Path
Users can command the HDZ Series Analogue PTZ Dome to delete the selected Autopan Line.
Move the cursor to
DELETE and press the IRIS+ key ( ENTER ) to delete the selected Autopan
Line (see Selecting an Autopan Line on page 69 for more information on selecting the Autopan
to be deleted).
Dome
Right Left
Left
(counter-
clockwise)
Right
(clockwise)