Honeywell HDZ30A, Руководство пользователя

Страница: 36 / 114

www.honeywell.com/security
36 | HDZ Series Analogue PTZ User Manual
Accessing the Main Menu
To enter the OSD menu of the selected camera, use the PRESET 90 command on the control
keyboard. The OSD menu will open (see Figure 3-1 ). Depending on the keyboard controller
used, the buttons to press to input PRESET 90 will be different. See the following UltraKey
example:
UltraKey Touch Press View

9

0

Ent .
Figure 3-1 Main Menu Screen
Note Because the HDZ Series Analogue PTZ Dome is designed to work with a wide
variety of devices and protocols, all possible ways to perform a task are not given
here. The instructions in this guide are intended to supplement the instructions
provided in your controller’s user guide.
Using the OSD Password to Login
If OSD Password function is enabled, when you press the CAMERA MENU key to enter the OSD
menu, the password request message will be displayed as shown in Figure 3-2 . Please enter
the password, select ENTER and press IRIS+ to access the OSD main menu.
Figure 3-2 Enter Password Screen
MAIN PAGE1 1/3
LANGUAGE ENGLISH
→
DEFAULT CAMERA ON
→
BACKLIGHT OFF
→
FOCUS AUTO
↓→
AE MODE ENTER
↓
WBC MODE AUTO
→
SETUP MENU 1 ENTER
↓
SETUP MENU 2 ENTER
↓
PLEASE ENTER PASSWORD
_ _ _ _
0123456789
DELETE ENTER EXIT