Honeywell HDVR Скачать руководство пользователя страница 49

Страница: 49 / 238

HRDV Reference Guide

Rev 1.00

Document 900.0261

04/05

The User Permissions screen (see

Figure 6-2

) for that user name displays, indicating

you have successfully changed the password.

Changing User Names

On the User Permissions screen you can:

•

Change the user name

•

Enable or disable permission levels

Figure 6-2

User Permissions Screen

User names can be one to eight characters long (including the user number). The name
can be a combination of uppercase or lowercase letters, numerals, and symbols. To
change a user name:

On the User Permissions screen, press

to move to the User name field, then press

Enter

The Text Entry dialog box displays (see

Figure 4-2

). Use the control buttons to change

the user name and press

Accept

to confirm the changes.

To change the user permission levels, proceed to the next section. To accept the
changes as displayed, press

Enter

to exit this screen.

Содержание HDVR















































































































































































































































Результаты поиска

Содержание HDVR

Отзывы:

Honeywell HDVR, Справочное руководство, Страница: 49 / 238

Результаты поиска

Содержание HDVR

Отзывы: