manualshive.com logo in svg

Honeywell HDVR, Справочное руководство, Страница: 33 / 238

Поделиться
Скачать
Honeywell HDVR Скачать руководство пользователя страница 33

HRDV Reference Guide

Rev 1.00

15

Document 900.0261

04/05

Note

Formatting the hard drive will result in permanent loss of all images 

and other information (for example, text and audio) recorded on the 
hard drive.

In the event of an accidental Format All, go to the Data Recovery 
screen to have the system attempt to restore the file system to its 
original state (see 

Data Recovery

, page 

53

).

b.

The message 

Attention! Any future changes to disk partitioning 

will require a FORMAT ALL and your recorded data will be 
lost.

 Select 

OK

.

c.

The message 

Warning! This will delete all of the data on your 

drives! PROCEED?

 Select 

OK

.

5.

Connect the HRDV16/8 to all the local peripherals, including cameras, monitors, 
alarm inputs and outputs, external storage, and ATM/POS interface equipment (see 

Connecting the HRDV16/8 to Peripherals

).

6.

(Optional) Connect the HRDV16/8 to a PC via a modem, null modem, or Ethernet for 
remote operation. For more information, refer to the 

HRDV RAS User Guide

.

7.

Configure the HRDV16/8 for desired operation. See 

Chapter 4

 to 

Chapter 14

 for 

detailed information, or see 

Chapter 5, Easy Configurator

 for an overview of the quick 

setup procedure.

8.

Format the hard drive again (see 

step 4

 above). 

9.

To start recording, press 

REC

 on the HRDV16/8 front panel, then enter a user name 

and password when prompted.

Connecting the HRDV16/8 to Peripherals

Figure 3-1

 shows the rear panel connections on the HRDV16. Follow the instructions in 

Table 3-1

 to connect the HRDV16 to all peripherals.

Note

The HRDV8 rear panel looks the same as the HRDV16 except that it has 8 
analog video inputs, 8 analog video outputs, and 8 alarm inputs.

Содержание HDVR















































































































































































































































Отзывы:

Нет отзывов