Honeywell HDVR, Справочное руководство, Страница: 135 / 238

HRDV Reference Guide
Rev 1.00 117 Document 900.0261
04/05
When you have finished setting the text report criteria, select OK to return to the Create New
Report screen, then Accept to return to the Reports main menu.
To see your new report, press Run a Report . The report you created displays on the Select
Reports drop-down list.
Event Report Criteria
The Event Report Criteria screen allows you to specify whether the search and extraction
process will be based on event or timelapse information.
You may select as many or as few types of events as you want. These events are set up
separately using the Event Recording function (see
Motion Event Recording Setup on page
77 ). Reports can be based on the following event types:
• Alarm events are set up using the Alarm Events function (see Setting Alarm Events on
page 37 ).
• Motion events are set up using the Motion Events function (see Setting Motion Events
on page 77 ).
• Text events are set up using the Text Events function (see Step 3. Set Text Events on
page 146 ).
To set search criteria for an Event Report:
1. Open the Create New Report screen ( MENU
➤
Reports
➤
Create New Report ).
2. Enable Event report.
3. Select Report Criteria Setup , then press Enter . Figure 17-4 displays.
Video Video/text playback mode. Options are:
Play Video . This is the playback mode used in HRDV V1.50 and previous. Playing
back video and text as such can result in the HRDV reporting duplicate clips.
Associate video with text clip . Allows you to reduce the number of redundant
event video clips found in a search by associating any identical text strings in a
defined time span with only one video clip.
Start Specify how much of each video clip ( 2 to 10 seconds) is shown for each text
string before the text event occurred.
Play Specify how many seconds ( 2 to 10 ) in total should be played.
Field Description