800-15842V1 - A - 11/2013
HD62(X)
Indoor IR Minidome Camera
Quick Installation Guide
800-15842V1 - A - 11/2013
FCC Compliance Statement
Information to the user
: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Note
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Canadian Compliance Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du
Canada.
Manufacturer's Declaration of Conformance
The manufacturer declares that the equipment supplied with this guide is
compliant with the essential requirements of the EMC Directive 2004/108/EC,
the General Product Safety Directive 2001/95/EC and the RoHS Directive
2011/65/EU, conforming to the requirements of standards EN 55022 for
emissions, EN 50130-4 for immunity, EN 60950-1 for electrical equipment
safety, and EN 50581 for assessment of electrical and electronic products with
respect to the restriction of hazardous substances.
CAUTION
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND•
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
Warnings and Cautions
WARNING
Installation and servicing should be performed only by
qualified and experienced technicians to conform to all local codes
and to maintain your warranty.
WARNING
This device is configured for 12 V DC operation only. Do
not connect to a higher voltage. Use only with NRTL-approved 12 V DC
power supplies. To prevent potential ground loop issues, a separate
PSU should be used for each camera. A multiple output PSU may be
used if it has isolated and protected (2A max.) outputs.
CAUTION
The light emitted from the near-infrared light emitting
diodes (LEDs) provide illumination over a wide area. This light is not
considered a risk to the unshielded human eye. However, as with any
light source, it is recommended that normal precautions be taken to
avoid unnecessary exposure. For example, avoid staring into the
beam or viewing the LEDs directly with optical instruments at close
range.
CAUTION
IR LEDs may be warm after prolonged use.
Important Safety Instructions
•
Read and keep these instructions.
•
Please ensure that your installation area can safely support the weight of the
camera.
•
Do not install the camera in extreme temperature conditions. Only use the camera
where temperatures are within the limits shown in the specifications section of the
guide. Be especially careful to provide ventilation when operating under high
temperatures.
•
Do not aim the camera at extreme light sources to prevent damage to the CCD.
•
This camera is rated for indoor operation. Do not expose this camera to rain or
moisture.
•
Do not touch the camera lens, dome, or bezel (front glass plate).
•
Do not drop the camera or subject it to physical shock.
•
Do not use a strong or abrasive detergent when cleaning the camera.
Package Includes
Key Features
•
630 TV lines resolution
•
1/3
-inch
interline transfer CCD
•
2.8–12 mm (F1.4) IR-corrected varifocal manual iris lens
•
0 lux minimum illumination with IR LEDs on
•
Up to 65 ft (20 m) of IR illumination, depending on scene reflectance
•
Configurable day/night settings
•
Digital wide dynamic range (D-WDR)
•
Digital noise reduction (DNR)
•
Backlight compensation (BLC)
•
Motion detection (4 programmable zones)
•
Privacy masking (8 programmable zones)
•
3D-axis gimbal for flexible camera positioning
•
Local video out port for quick adjustments
•
On-screen display (OSD)
•
Camera (1)
•
Manuals (3)
•
Warranty (1)
•
IR reflectivity card (1)
•
Mounting template (1)
•
Mounting screws (4)
•
Plastic anchors (4)
•
Service monitor cable (1)
•
2-conductor pigtail (1)
