background image

4

FCC Compliance Statement

Information to the User: This equipment has been tested and found to 
comply with the limits for a Class A digital device. Pursuant to Part 15 of the 
FCC Rules, these limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to 
cause harmful interference in which case the user will be required to correct 
the interference at his own expense.

Caution

Changes or modifications not expressly approved by 
the party responsible for compliance could void the 
user’s authority to operate the equipment.

Manufacturer’s Declaration of Conformance

The manufacturer declares that the equipment supplied with this guide is 
compliant with the essential protection requirements of the EMC directive 
2004/108/EC and the Low Voltage Directive LVD 2006/95/EC, conforming to 
the requirements of standards EN 55022 for emissions, EN50130-4 for 
immunity, and EN 60950 for Electrical Equipment safety.

Содержание HCD95534

























Отзывы: