Honeywell HCC-745NTW/PTW, Руководство по эксплуатации, Страница: 18 / 21

- 18 -
<Fig5-12. SPECIAL FUNCTION >
<< SPECIAL FUNCTION >>
①
MIRROR
②
SHARPNESS
③
NEGATIVE
④
FREEZE
⑤
BAUDRATE
⑥
PROTOCOL
⑦
F.OSD DISP
RETURN
OFF
10
OFF
OFF
9600bps
DEFAULT
ALL
5.12 SPECIAL FUNCTION
①
Mirror Mode
: Mode ON is Mirror Mode, OFF is general screen state.
MIRROR OFF
→
H MIRROR
→
V MIRROR
→
FLIP . . . .
②
Sharpness
: Use to change the contour of Scene.
SHARPNESS 0 ~ 15
③
Negative Mode
: Use for Positive and Negative mode. ON is Negative mode,
OFF is Positive mode namely general screen state.
NEGATIVE OFF
→
ON
→
….
④
Freeze Mode
: It pause current image. ON is to stop, OFF is to return
to normal state.
FREEZE ON
→
OFF
→
….
☞
caution
1. Freeze image is not saved after Power OFF / ON .
That’s why it doesn’t have memory for saving.
⑤
BAUD RATE
: Use to communicate through RS232C, RS485, RS232TTL .
BAUDRATE 4800bps
→
9600bps
→
….
→
312kbps
☞
caution
1. When Baud Rate of Camera and external system is not
same, it happens Communication fail.
⑥
PROTOCOL
: Use to communicate through RS232C, RS485.
PROTOCOL DEFAULT
→
VCL
→
KD6
→
P/D
→
....
⑦
Function OSD Display
OSD DISP ALL
→
NONE
→
TOP
→
BOTTOM
→
....
ALL : Whole Function OSD display
( Focus Mode, Key state, Zoom Ratio, ID )
TOP : Only Upper OSD display ( Focus Mode, key state )
BOTTOM : Only Lower OSD display ( Zoom Ratio, ID )
NONE : Whoe Function OSD display not.
5.13 FACTORY DEFAULT
: All changed data are returned to shipping condition.
For Initialization, select “RESTORE FACTORY SETTING” and
push MENU key.
☞
caution
1. Keep in mind that this mode return all changed data to
shipping condition.
2. Some menu as ID,TITLE, etc are not initialized.
<Fig5-13. RESTORE DEFAULT>
<< RESTORE DEFAULT >>
①
RESTORE FACTORY SETTING
RETURN
<Fig5-14. EXIT MENU>
<< EXIT MENU >>
①
SAVE AND EXIT
②
EXIT
RETURN
5.14 EXIT MENU
①
SAVE AND EXIT
: Exit OSD MENU with saving all changed data.
②
EXIT
: Exit OSD MENU withoout saving all changed data.