Honeywell HAW501E, Руководство по эксплуатации, Страница: 5 / 31

8 9
IMPORTANT SAFETY INSTRUCTIONS
READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
1. Before using this appliance, read through all the instructions
and only use accordingly.
2. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
3. If the supply cord is damaged, the manufacturer, their service
agent or a similarly qualified person should replace it to avoid a
hazard.
4. This air washer requires regular cleaning. Refer to the
CLEANING instructions provided. Never clean the air washer
in any manner other than as instructed in this manual. The air
washer must be disconnected from the supply mains before
cleaning.
COMPONENTS
See page 4 for details
1. Handle for carrying/Handle for removing housing
2. Air outlet grill
3. Control panel
4. Air inlet grill
5. Water tank
6. Water basin
7. Power
cord
8. Discs
9. Water tank stopper
10. Filter set
I. Pre-filter
II.
Purification filter
11. Anti-odour filter (see instruction on filter package)
CONTROL PANEL
A. On/Off button
B. Fan setting
C. Humidity setting
D. Filter reset button
SPARE PARTS
RPA-HAW501-19 Tank
RPA-HAW501-24 Discs
RPA-HAW501-26 Disc Lock
RPA-HAW501-17 Tank stopper
RPA-HAW501-01 Purification filter
RPA-HAW501-25 Pre-filter
RPA-HAW501-20 Magnetic float
ENGLISH ENGLISH
INSTRUCTIONS FOR USE
See page 5 for details.
HOW YOUR PRODUCT WORKS
See page 8 for details.
CONTROL PANEL INSTRUCTIONS
See page 6 for details.
When turned on, the default setting for the fan is
medium. The fan will work on HIGH for 5 seconds and
then return to MEDIUM. Press once for HIGH, again for
LOW and again for MEDIUM.
The default humidity setting is “Continuous”. The cur-
rent humidity level is indicated by the lower number
beside the house. The upper number indicates the
desired humidity level. Press the button to choose
the relative humidity from 35% to 50%. The settings
increase each time by 5%. As soon as the desired level
has been reached the icon illuminates and the discs
stop turning.
The anti-odours filter cannot be washed but must be
replaced. The purification filter and the pre-filter can be
washed using a small amount of liquid soap. The filter
must be completely dry before re-inserting into the unit.
Once the refill icon lights up, the fan and discs will auto-
matically stop moving. Once the water tank has been
refilled and replaced, the light should extinguish and
the fan and discs will start to rotate once again.
INSTRUCTIONS FOR CLEANING
See page 7 for details.
CLEANING INTERVAL OF COMPONENTS
Outer housing – as needed
Discs – every week
Water tank (incl. cap) – every week
Water basin – every week
Pre-filter – every three months
Primary permanent filter - every three months
3 YEAR GUARANTEE
CONDITION OF PURCHASE
As condition of purchase the purchaser assumes responsibility for
the correct use and care of this Kaz product according to these
user instructions. The purchaser or user must himself or herself
decide when and for how long this Kaz product is in use.
WARNING: IF PROBLEMS ARISE WITH THIS KAZ PRODUCT,
PLEASE OBSERVE THE INSTRUCTIONS IN THE GUARANTEE
CONDITIONS. DO NOT ATTEMPT TO REPAIR THE KAZ PRODUCT
YOURSELF, AS THIS COULD LEAD TO TERMINATION OF
THE GUARANTEE AND CAUSE DAMAGE TO PERSONS AND
PROPERTY.
DISPOSAL
This symbol on the product or its packaging
indicates that the appliance cannot be treated
as normal domestic waste but must be handed
in at a collection point for recycling electric and
electronic appliances.
Your contribution to the correct disposal of this product protects
the environment.
Further information about the recycling of this product can be
obtained from your local town hall, your refuse collection service,
or in the store at which you bought the product. This regulation is
valid only in EU member states.
✓
HOW THE VITA AIR™ WORKS
1. A fan pulls dry,
dirty air into the unit.
2. The primary
permanent filter
captures small,
harmful particles
from the air.
3. The filtered air is
then cleansed with
the water when it
is circulated by the
rotating discs.
4. Moisture from the basin
is added to the air.
5. Cleaner, fresher
hydrated air is returned
to the room.
E. Fan setting indicator
F. Humidity control indicator
G. Filter cleaning indicator
H. Refill indicator