Honeywell H2W2PRV3, Руководство по настройке программного обеспечения

Страница: 25 / 94

Logging In and Viewing Live Video
13
Using the Live View Interface
The Live View interface has four areas with controls and options for monitoring live video.
Figure 3-5 Live View Interface
1. Video encoder settings area (see Video Encoder Settings, page 13 )
2. System menus (see System Menus, page 14 )
3. Live View controls toolbar (see Live View Controls, page 14 )
4. Live View window settings toolbar (see Live View Window Configuration , page 15 )
Video Encoder Settings
In the video encoder settings area of the Live View interface, you can choose a stream and set the
stream protocol.
Figure 3-6 Video Encoder Settings
Table 3-1 Video Encoder Settings
Setting Description
Main Stream
In a normal network bandwidth environment, the main stream can
record audio/video files and support a network monitor.
Set the main stream resolution if your camera supports it.
Sub Stream 1/Sub Stream 2
If the network bandwidth is not sufficient, you can use the sub
stream to support a network monitor.
Protocol
You can select the stream media protocol from the drop-down list.
There are three options:
TCP , UDP , or Multicast .
1
2
3
4