Honeywell Granit 1920i, Быстрый старт

Страница: 8 / 15

7
Active Aimer
By default, the scanner and the aiming beam remain off until
you press the trigger. When Active Aimer is set to On , whenever
the scanner is moved, the aiming beam appears so you can aim,
then scan a bar code with a trigger press.
DPM Illumination Settings
By default, the Granit 1920i cycles through the Direct Illumina-
tion - Top and Bottom, and Indirect Illumination settings. To fur-
ther refine the scanner’s ability to read DPM codes, scan one of
the following four illumination setting codes. Only one of these
illumination settings can be used.
Direct Illumination - Top and Bottom
This setting enables both top and bottom illumination. It is rec-
ommend when reading printed label bar codes and DPMs on
highly reflective surfaces.
Active Aimer On