Honeywell Granit 1911i, Руководство пользователя

Страница: 218 / 266

11 - 12
User-Specified Good Read Delay Range 0 - 30,000 ms DLYGRD##### 4-6
Manual Trigger Modes *Manual Trigger - Normal PAPHHF 4-6
Manual Trigger - Enhanced PAPHHS 4-6
LED Illumination - Manual Trigger Off PWRNOL0 4-6
Low PWRNOL100 4-6
Medium (Xenon only) PWRNOL120 4-6
*High PWRNOL150 4-6
Serial Trigger Mode Read Time-Out
(0 - 300,000 ms) *30,000 TRGSTO#### 4-7
Presentation Mode Presentation Mode PAPTPR 4-7
LED Illumination - Presentation
Mode Off PWRLDC0 4-7
Low PWRLDC100 4-7
*High PWRLDC150 4-7
Presentation LED Behavior After
Decode *LEDs On TRGPCK1 4-8
LEDs Off TRGPCK0 4-8
Presentation Sensitivity Range 0-20 (*1) TRGPMS## 4-8
Presentation Centering Window Presentation Centering On PDCWIN1 4-9
*Presentation Centering Off PDCWIN0 4-9
Left of Presentation Centering
Window (*40%) PDCLFT### 4-10
Right of Presentation Centering
Window (*60%) PDCRGT### 4-10
Top of Presentation Centering
Window (*40%) PDCTOP### 4-9
Bottom of Presentation Centering
Window (*60%) PDCBOT### 4-9
In-Stand Sensor Mode Sensor On TRGSSW1 4-10
Sensor Off TRGSSW0 4-10
CodeGate *CodeGate Off Out-of-Stand AOSCGD0. 4-10
CodeGate On Out-of-Stand AOSCGD1. 4-10
Streaming Presentation Streaming Presentation Mode -
Normal PAPSPN 4-11
Streaming Presentation Mode -
Enhanced PAPSPE 4-11
Mobile Phone Read Mode Hand Held Scanning - Mobile
Phone PAPHHC 4-11
Streaming Presentation - Mobile
Phone PAPSPC 4-11
Hands Free Time-Out Range 0 - 300,000 ms TRGPTO###### 4-12
Reread Delay Short (500 ms) DLYRRD500 4-12
*Medium (750 ms) DLYRRD750 4-12
Long (1000 ms) DLYRRD1000 4-12
Extra Long (2000 ms) DLYRRD2000 4-12
User-Specified Range 0 - 30,000 ms DLYRRD##### 4-12
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page