ILI-MB-E3 Product Installation Document —
P/N 9000-0579:M7 07/02/2018
7
2.5.3 ILI-MB-E3 Installed to the Retrofit Cabinet, Mounting Plates
The ILI-MB-E3 can be installed in the following retrofit cabinet mounting plates.
B-Slim Cabinet
600XL Retrofit Cabinet
7200 Cabinet B
7200 Cabinet C
•
B-SLIM-E3 Plate
•
E3-INCC-C Plate
•
E3-INCC-C Plate
•
E3-INCC-D Plate
•
E3-ILI-C Plate
2.5.3.1 ILI-MB-E3 Installed to the B-SLIM-E3 Plate
2.5.3.2 ILI-MB-E3 Installed to the 600XL or 7200
Retrofit Cabinet Mounting Plates
1.
Align and mount the ILI-MB-E3 to the pins on the B-Slim-
E3 Plate.
1.
Align and mount the ILI-MB-E3 to the pins on the retrofit
cabinet, mounting plate.
2.
Insert the eight screws (#4-40) into the eight-hole mounting
pattern and secure the screws to the B-SLIM-E3 plate as
shown in Location 1 of the figure below.
2.
Insert the eight standoffs (3/16” HEX #4-40, x 1.25”) into
the eight-hole mounting pattern and secure the standoffs to
the retrofit cabinet, mounting plate as shown in Location 1
of the figure below.
NOTE:
Use standoffs to mount the DACT-E3/RPT-E3-UTP or the ANX on top of the ILI-MB-E3.
Figure 2.5.3.1.1 illustrates the ILI-MB-E3 installed to the B-
SLIM-E3 Plate
Figure 2.5.3.1.1 ILI-MB-E3 Installed to the
B-SLIM-E3 Plate
Figure 2.5.3.2.1 illustrates the ILI-MB-E3 installed to the 7200
Cabinet mounting plates.
Figure 2.5.3.2.1 ILI-MB-E3 Installed to the 7200
Retrofit Cabinet Mounting Plate
ILI-M
B-E
3
SCREW, #4-40
8 PLACES
B-S
LIM
-E3
PL
AT
E
1
1
NOTE: MOUNT ANY OF THE
FOLLOWING OPTIONAL
MODULES ON TOP OF THE
ILI-MB-E3/ILI95-M,B-E3:
- DACT-E3/RPT-E3-UTP
- ILI-S-E3/ILI95-S-E3
- ANX
7200 CABINET B,
E3-INCC-C PLATE
1
ILI-
MB
-E3
STANDOFF,
3/16" HEX
(#4-40 x 1.25”)
8 PLACES
1
