Map Galaxy panel events to Security Center actions
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
34
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
Map Galaxy panel events to Security Center actions
Galaxy Dimension control panel events can trigger actions in Security Center. For example, a
Unit tamper
event on the control panel can trigger a Security Center alarm.
NOTE
Output pins on the control panel only support the
Trigger output
action.
1
From the
Home page
in Config Tool, open the
System
task.
2
Click the
General settings
view, and click the
Actions
page.
3
In the
Actions
page, click
.
4
In the
Entity type
page, select
Intrusion detection unit
or
Intrusion detection area
,
and
click
Next
.
5
In the
Source
page, select a unit or area, and click
Next
.
6
In the
Event
page, select an event.
The default schedule is
Always
. If necessary, you can change the default schedule.
NOTE
If you created custom events in the intrusion detection unit
Properties
tab, then they
are available in the event list. For more information, see
"Map inputs to intrusion detection
7
Click
Next
.
