Honeywell GA-SP01, Руководство пользователя

Страница: 13 / 31

The Sampler
Getting Started
Getting Started
Airflow is continuously monitored and controlled by the
sampler. It occasionally adjusts motor speed to compensate
for changes in environmental and sampling conditions and
automatically enters calibration mode, when needed. You
can verify the correct operation at any time by blocking the
sampler’s flow and noting a low flow alarm state.
The items listed below are included with your sampler. If the
sampler is damaged or something is missing, contact the
place of purchase immediately.
•
Batteries (2 replaceable AA alkaline cells)
•
Short sample tube, (4.65 in./11.81 cm)
•
Medium sample tube, (10.25 in./26.00 cm)
•
Sampling hose, (10 ft./3 m). Blue stone coarse
particulate filter attached
•
Attachment hose, (3 ft./1m)
•
Particulate filter, Qty. 2
•
Quick reference card
•
User Manual
To order replacement parts, see the section Replacement
Parts and Accessories .
The sampler is shipped with the short sample tube installed.
The
Operation section describes how to install another
sample tube. The Maintenance section describes how to
install the batteries.
To become familiar with the features and functions of the
sampler, study the following figures and tables:
•
Figure 1 and Table 2 describe the sampler’s
components.
•
Figure 2 and Table 3 describe the sampler’s LEDs.
•
Table 4 describes the sampler’s pushbuttons.
5
www.
optimum
stores
.com/bw
Shop for BW products online at: