Honeywell F500 Скачать руководство пользователя страница 5

F500 WHOLE HOUSE/ LIGHT COMMERCIAL HEPA FILTRATION SYSTEM

5

68-0263-2

Installing HEPA AIRWATCH™ Indicator

Mount the HEPA AIRWATCH™ Indicator next to the 
thermostat or in any other convenient location in the home 
living area. The battery-operated device has no external 
electrical requirements.

1.

Remove the AIRWATCH Indicator from the base:
a. Press the tab on the bottom edge of the base.
b. Pull off the bottom of the front cover.

2.

Position the base on the wall in the desired mounting 
position.

3.

Using the holes in the base as a template, mark the 
locations for the anchors and screws provided.

4.

Drill the holes (3/16 in.) and install the screw anchors 
provided.

5.

Position the base over the holes and install the screws 
to firmly secure the base to the wall.

NOTE:

Jumper is factory-installed on pins 1 and 2 for normal 
usage.

6.

Move the jumper to pins 2 and 3, if desired, for light duty 
filter change intervals as shown in Table 2.

 

7.

Install two AAA alkaline batteries (provided) in the har-
ness on the back of the device.

8.

Observe that the device performs a self-test, beeping 
and flashing the LCD display. 

9.

To start the timers, press and hold the black reset button 
on the bottom of the device for five seconds or until the 
display stops flashing. 

10.

Observe the battery LCD (see Fig.5): 
a. On solidly means the unit is correctly powered. 
a. Flashing indicates the battery requires replacing. 

11.

Observe the AIRWATCH (see Fig. 6): 
a. Beep every ten minutes when an LCD is flashing. 
b. Beeping indicates need to replace the system part 

that corresponds with the flashing LCD. 

NOTES:

When batteries need replacing, replace them 
within 30 seconds of removal to maintain the cor-
rect indicator time. 

After 30 seconds of replacing the batteries, if the 
LCD is blank, remove and install new batteries. 

When replacing other parts, press and hold the 
black button on the bottom of the device to reset 
the timer after replacing the parts.

Fig. 6. HEPA AIRWATCH™ Indicator.

Table 2. Filter Change Intervals.

Filter

Normal (Factory 

Setting)

Light Duty

Carbon odor filter

3 months

4 months

Pleated prefilter

12 months

16 months

HEPA filter 

3 years 

5 years

On/Battery

TM

Odor Filter

Prefilter

HEPA Filter

Whole House HEPA Filtration System

Honeywell.com/yourhome

M20580

Содержание F500









Отзывы: