43-TV-33-81 iss.2 GLO Aug 19 UK
2
Before attempting to repair or upgrade a recorder, it is advisable to clear a sufficient work space so components such as
the front panel can be rested on the work surface without getting scratched or damaged.
Panel Mounting
To replace or fit the Expansion Board the recorder must be removed from the panel. To require the recorder from the
panel, loosen the mounting clamp screws, slide the clamp towards the rear of the recorder and remove the clamps and
the recorder.
Removing the Case
Removal of the entire case is necessary for replacement or fitment of the Expansion Board.
Remove any connectors fitted in the rear of the recorder, including. The case and back panel can be removed as one
assembly.
Remove the 4 screws (2 on each side of the case). Retain screws for re-fitting.
Slide the entire case off the back of the recorder.
Figure 1
QXe recorder
Remove 2
screws each
side