background image

Installation and Commissioning

Instructions

Note: QuickSet Pro required for commissioning

 

HC5A available for user override

MLS Digital Detector

MLS2000DF for DSI ballasts 

MLS2000DALIF for DALI ballasts

by Honeywell

Содержание Ex-Or MLS2000DF

Страница 1: ...lation and Commissioning Instructions Note QuickSet Pro required for commissioning HC5A available for user override MLS Digital Detector MLS2000DF for DSI ballasts MLS2000DALIF for DALI ballasts by Honeywell ...

Страница 2: ... remain powered up The MLS Bus must be connected to the MLS bus wiring network An MLS Bus Power Supply is required for each network of up to 200 MLS Detectors Please refer to Bus Power Supply instructions prior to commencement of any bus wiring 2 It is imperative that the MLS bus is wired with the correct type of cable normally it should be 1 5mm unscreened twisted pair Please readApplication Note...

Страница 3: ...ied 100 max Bus Connect Yes No Yes Do Do not Signal Receive on MLS Bus 1st 4th Zone Address 1 100 no zone Common 1 3 No Zone Individual Zones influencing and being influenced by this detector Corridor 1 2 0 100 no zone Building No Zone Zone ranges influencing and being influenced by this detector Global 1 2 Rx Yes No No Respond to selective load shedding Manual Input Shared Local Local Do Do not s...

Страница 4: ...ng practice The 0V line of the dimmingoutputis almostat Neutralpotential 3 The dimmingcontroloutputshouldbe connectedonly to the controlinputof the ballasts neverto otherdetectors 4 This equipmentshouldbe used to controlonly thoseballastspoweredfrom the same phaseas the detector 5 Due to the fact that the photocell is on the ceiling looking down it is not possible for measurements made with a lux ...

Отзывы: