
EW447-EW452 SERIES MECHANICAL HEATMETERS
Honeywell
y
All rights reserved
10
EN0H-2601GE25 R0413
Connection Sets for Flow Sensor
NOTE: Union nuts of connection sets EWA15000 are drilled
for sealing with locking wire. Union nuts of connection
sets VA7403, VA7404 and VA7405 are not sealable
with locking wire
Connection Sets for Temperature Sensors
Modules
Other Accessories
Set of two union nuts, two sealings and two externally
threaded brass tailpieces (one pack per meter required) –
sealable with locking wire
For DN15, R1/2” x G3/4”
EWA1500035
For DN20, R3/4” x G1”
EWA1500042
For DN25, R1” x G1 1/4”
EWA1500062
For DN40, R1 1/2” x G2”
EWA1500072
Set of union nut, sealing and Sanpress red bronze crimp
fitting (two packs per meter required)
For DN15, for 15mm pipe-Ø
VA7404A015
For DN15, for 18mm pipe-Ø
VA7404A018
For DN20, for 22mm pipe-Ø
VA7404A020
For DN25, for 28mm pipe-Ø
VA7404A025
Set of union nut, sealing and Mapress stainless steel
crimp fitting (two packs per meter required)
For DN15, for 15mm pipe-Ø
VA7403A015
For DN15, for 18mm pipe-Ø
VA7403A018
For DN20, for 22mm pipe-Ø
VA7403A020
For DN25, for 28mm pipe-Ø
VA7403A025
Set of union nut, sealing and internally threaded red
bronze tailpiece (two packs per meter required)
For DN15, thread Rp1/2”
VA7405A015
For DN20, thread Rp3/4”
VA7405A020
For DN25, thread Rp1”
VA7405A025
Temperature sensor installation kit (bulk pack of 20pcs)
Brass, max. 130°C
EWA3001303
Plastic, max. 90°C
EWA3001305
Tailpiece for direct connection of temperature sensor to
T-piece with 1/2” internal thread. Temperature sensor
installation kit required
R1/2" external thread,
M10x1 sensor thread
EWA087HY003
R1/4" external thread,
M10x1 sensor thread
EWA354830
Ballvalve with direct connection for temperature sensor.
Temperature sensor installation kit required
DN15, G1/2” internal thread EWA087HY004
DN20, G 3/4” internal thread EWA087HY005
DN25, G1”internal thread
EWA087HY006
Brass immersion pockets
35mm, for DN25…32
EWA3002684
52mm, for DN40…65
EWA3002685
85mm, for DN80…100
EWA3004406
Ballvalve with connection for supply temperature sensor
G1/2" internal thread
EWA087HY004
G3/4" internal thread
EWA087HY005
G1" internal thread
EWA087HY006
Tailpiece for connection of supply temperature sensor
R1/2" external thread,
M10x1 sensor thread
EWA087HY003
Brass immersion pocket (for use with MID meters)
35mm, for DN15...32
EWA3002684
52mm, for DN40...65
EWA3002685
85mm, for DN80...125
EWA3004406
External RF module
M-Bus, for all EW773 with
M-Bus module
EW9100AEZ001
M-Bus cable, length=3m
For all EW4xxM
EWA812851
Bluetooth optohead
For all EW447-452
EWA3001799
Calibration certificates
For up to five meters
EWA3003095A
For six to 20 meters
EWA3003095B
For more than 20 meters
EWA3003095C