Honeywell EQUIP Series, Руководство по установке и настройке

Страница: 81 / 148

EQUIP
®
Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Document 800-04194V1 Rev A 61
07/11
To set the minimum focus distance:
1. From the OSD main menu, press 5 to select Camera Options .
2. Press 1 to select Zoom and Focus .
3. Press 3 to set the minimum focus length (in centimeters) to 30 or 150
(default).
Setting Exposure
Setting the Auto Exposure (AE) Mode
You can set the auto exposure to Auto AE mode or to Manual AE mode. You can
also slow the AE response speed to minimize exposure changes caused by
momentary bright spots in the image.
To set the Auto AE mode:
1. From the OSD main menu, press 5 to select Camera Options .
2. Press 2 to select Exposure Control .
3. Press 1 to set the Auto AE Mode using Table 8-1 as a reference.
The features associated with each exposure mode are displayed below the
menu options.
Table 8-1 Auto Exposure Control Mode Settings
Setting NightShot
Control Auto
NightShot
Sensitivity Digital Slow
Shutter
Auto AE Mode MAN NA OFF
Auto AER1 Mode AUTO HIGH OFF
Auto AER2 Mode AUTO MID OFF
Auto AE+ Mode MAN NA AUTO
Auto AER+1 Mode (default) AUTO HIGH AUTO
Auto AER+2 Mode AUTO MID AUTO
Auto AER+3 Mode AUTO LOW AUTO