USE & OPERATION (CONTINUED)
DRAINING THE WATER
The Continuous Drain Pump is available if you want to use the continuous drain function, but the
drain is further away, or located above the dehumidifier. A 16.4ft (5m) long drain tube* can be
attached to the continuous drain pump located on the back side of the dehumidifier. When the
water level in the water tank reaches a certain level, the drain pump will automatically pump the
water out of the tank to the drain. This allows you to drain water condensation vertically or
horizontally, even if the drain is located above the dehumidifier.
3.1
3.2
3.3
3.4
3.5
3. Continuous Water Drainage – Continuous Drain Pump
3.1
Drain Tube
Drain Tube
Connector
3.2
Drain Pump
Hole
3.3
3.6
Release Button
Unwrap the drain tube from the dehumidifier and locate
the drain tube connector on one end of the drain tube.
Insert the drain tube connector into the drain pump hole
located on the rear side of the dehumidifier.
Push the drain tube connector into the drain pump hole
until you hear a “click” sound.
Place the other end of the drain tube into the sink or
drain. The water can be pumped up to 16.4ft (5m)
vertically or horizontally.
NOTE:
DO NOT
use an alternative drain tube that is
longer than the one provided with the unit.
To disconnect the drain tube, press the release button
above the drain pump hole while pulling the drain tube
connector away from the drain pump hole.
*Continuous Drain Tube is included in Dehumidifier models with
Continuous Drain Pump feature only.
EN
6