10
About CT45 XP Models with USB Type C Connector
You can use a USB cable to charge the mobile computer from a
host device (e.g., laptop or desktop computer). The connected
host device must supply a minimum power output of 5V, 1A to
the CT45/CT45 XP or the battery will not charge.
Note:
If the mobile computer is drawing more current than supplied by
the charging source, charging will not take place.
Turn Power On/Off
The first time you power on the computer, a Welcome screen
appears. You can either scan a configuration barcode or use the
Wizard to manually set up the computer. Once setup is
complete, the Welcome screen no longer appears on startup
and Provisioning mode is automatically turned off (disabled).
To turn the computer on:
• Press and hold the
Power
button for approximately 3 seconds,
and then release.
To turn the computer off:
1.
Press and hold the
Power
button until the options menu
appears.
2.
Touch
Power Off
.
Battery Replacement
Before removing the battery, always do one of the following:
• Power off the computer.
• Place the unit in Swap Battery mode (available on CT45 XP
models only).
