2
USE & OPERATION
EN
CONTROL PANEL
SPEED / ON - OFF
Connect to the power supply and turn the SPEED knob. The fan will start. Change the speed from 3
to 1 (3 for High, 2 for Medium and 1 for Low fan speed). To switch OFF the unit, turn the SPEED knob
to 0.
COOL
You must add water before operating the unit on Cool mode. Turn the COOL knob to the ON position
to activate evaporative cooling. The water pump will operate and you will feel the cooler air after the
Honeycomb Cooling Media is completely wet.
Make sure that the water in the tank is above the minimum water level mark. Running the unit in
COOL mode with inadequate water may cause pump failure.
SWING KNOB
Rotate it to right will lock the rotary grill, rotate it to left (normal/original position) the grill will rotate
once speed knob is turn to any speed level (except 0).
FUNCTION BUTTONS
