manualshive.com logo in svg

Honeywell CHRONOTHERM III T8611M, Руководство пользователя

Поделиться
Скачать
Honeywell CHRONOTHERM III T8611M Скачать руководство пользователя страница 1

1

68-0076—1

CONTENTS

Specifications ................................................. 2
Ordering Information ..................................... 2
Selection/Application ..................................... 5
Installation ................................................... 12
Checkout ....................................................... 18
Programming The Thermostat ..................... 20
Operating The Thermostat ........................... 25
Operation ..................................................... 27
Troubleshooting ........................................... 29
Glossary ....................................................... 30
Table of Contents ......................................... 32

T8611M

(7-Day Programming)

Chronotherm III™

Heat Pump Thermostats

The T8611M Chronotherm III Programmable

Thermostat provides automatic control of multi-
stage heat pump systems and offers users the
highest standard of comfort and convenience
available with energy savings.

■

Full seven-day program capability; different sched-
ules may be selected for every day.

■

Can be programmed in hand (with batteries in-
stalled) or on the wall to provide up to four tem-
perature periods per day.

■

Large digital clock (liquid crystal display) indi-
cates continuous time-of-day, day-of-week, cur-
rent period and room temperature.

■

Adaptive Intelligent Recovery™ brings room tem-
perature to programmed temperature at program-
med time, maximizing comfort and energy sav-
ings.

■

Temperature control program maintains tempera-
ture within 1

°

 F of setpoint.

■

Temporary program override available by using—
— WARMER and COOLER keys.
— SKIP next period key.
— CHANGE to last period key.

■

HOLD TEMP key provided for indefinite program
override (vacation/holiday).

■

Installer self-test with time delay override saves
installation time.

■

SYSTEM light-emitting diode (LED) on thermo-

stat indicates system is energized.

■

AUX. HT., EM. HT., CHECK LEDs available on
select models.

■

Automatic heat/cool changeover.

■

Batteries included provide power to maintain clock
and memory during power failures.

■

Switching subbase with wiring terminals included.

■

Powered directly from control transformer.

■

Model available with separate sensor for remote

temperature sensing.

C. H.  •  Rev. 10-92  •  ©Honeywell Inc. 1992  •  Form Number 68-0076—1

Содержание CHRONOTHERM III T8611M

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды