GasAlertMicroClip
Activating the Detector
Last Calibration Failed (optional)
,IDQ\VHQVRUIDLOHGWKHODVWFDOLEUDWLRQ
&$/)$,/85(
GLVSOD\V
RQWKHVFUHHQ
Note
When the CAL FAILURE displays, the previous calibration has
failed but the calibration is still valid until the next calibration due
date.
Overdue Calibration
,IDQ\VHQVRULVSDVWGXHIRUFDOLEUDWLRQWKHGHWHFWRUEHHSV
IODVKHVYLEUDWHVDQGWKHIROORZLQJVFUHHQGLVSOD\V
,IFDOLEUDWLRQLVRYHUGXHDQGWKH
)RUFH&DOLEUDWLRQ:KHQ
2YHUGXH
RSWLRQLVHQDEOHGDFDOLEUDWLRQPXVWEHSHUIRUPHGWR
HQWHUQRUPDORSHUDWLRQ5HIHUWR&DOLEUDWLRQ
Note
If calibration is not performed, or
C
is not pressed within
2 minutes, the detector automatically deactivates.
,IWKH
)RUFH&DOLEUDWLRQ:KHQ2YHUGXH
LVGLVDEOHGSUHVV
C
WR
DFNQRZOHGJHWKHZDUQLQJ7KHGHWHFWRUFRQWLQXHVZLWKWKH
VWDUWXSVHOIWHVWVDQGWKHQHQWHUVQRUPDORSHUDWLRQ
Cal IR Lock
,IWKH
&DO/RFN
RSWLRQLVHQDEOHGWKHIROORZLQJVFUHHQGLVSOD\V
5HIHUWR6WDUWXS7URXEOHVKRRWLQJ
Bump Test
Note
A bump test cannot be conducted if the detector has just been
calibrated. If the Bump Interval option is defined as
in Fleet
Manager II, the bump test is bypassed.
BW recommends to “bump test” the sensors, before each day’s
use, to confirm their ability to respond to gas by exposing the
detector to a gas concentration that exceeds the alarm setpoints.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
