GB-14
D
GB
F
NL
I
SK
RUS
E
RO
SRB
W
e r
eserve the right to make technical modifications
in the inter
ests of pr
ogr
ess.
Contact
Germany
Elster GmbH
Strotheweg 1
49504 Lotte
Tel. +49 541 1214-0
Fax +49 541 1214-370
[email protected]
www.elster-instromet.com
United Kingdom
Elster Metering Limited
Paton Drive
Tollgate Business Park
Beaconside
Stafford, ST16 3EF
Tel. +44 1785 275200
Fax +44 1785 275300
[email protected]
www.elster-instromet.com
Ireland
Active Energy Control Ltd.
Unit 4, Clare Marts
Quin Road
Ennis, Co. Clare
Tel. +353 65 6840600
Fax +353 65 6840610
[email protected]
www.aec.ie
Contact
ATEX legend
= Marking of explosion protection
II
= Equipment group ll for general industries
(with the exception of mines)
-/2
= Category:
internal: none
external: Category 2 (Zone 1)
-/3
= Category:
internal: none
external: Category 3 (Zone 2)
3
= Category 3 (Zone 2)
3/1
= Category:
internal: Category 3 (Zone 2)
external: Category 1 (Zone 0)
G
= Type of atmosphere: gases, hazes and
vapours
ic
= Type of ignition protection: intrinsic safety
for Zone 2
c
= “Constructional safety” explosion protec-
tion type
IIB, IIA = Explosion group for gases
TX
= No intrinsic heating
T1
= Temperature class: maximum allowable
surface temperature 450°C
T4
= Temperature class: maximum allowable
surface temperature 135°C
T6
= Temperature class: maximum allowable
surface temperature 85°C
Gc
= Equipment protection level for Zone 2
Ta
= Ambient temperature
Logistics
Transport
Diaphragm gas meters are always to be transported
in the upright position. On receipt of the product,
check that the delivery is complete, see page 2
(Part designations). Report any transport damage
immediately.
Storage
Diaphragm gas meters are always to be stored in
the upright position and in a dry place. Ambient tem-
perature: see page 9 (Technical data).
Disposal
Meters with electronic components:
WEEE Directive 0/9/EU – Waste
Electrical and Electronic Equipment Directive
At the end of the product life, dispose of the
packaging and product in a corresponding
recycling centre. Do not dispose of the unit
with the usual domestic refuse. Do not burn
the product.
On request, old units may be returned carriage paid
to the manufacturer, see page 14 (Contact), in
accordance with the relevant waste legislation re-
quirements.
