Honeywell BENDIX/KING KTR 2280, Руководство по установке системы

Страница: 20 / 74

n
KTR 2280 Preliminary H 08/17/06
Rev. 0, Aug/2006
©Honeywell International Inc. Do not print without express permission of Honeywell
Page 1-6
1.6 LICENSING REQUIREMENTS
The KTR 2280 meets CFR Title 47, Part 15 and Part 2 (FCC Approvals) for all radio
equipment. For non-US registered aircraft, follow applicable licensing requirements as
required.
The Federal Communications Commission requires that the operator of the transmitter of
this equipment hold a restricted radio telephone operators permit (FCC Form 605) or
higher class license. A permit may be obtained by a U.S. citizen from the nearest field
office of the FCC; no examination is required. An Aircraft Station License is required for
this equipment. Forms (FCC Form 605, New Aircraft Station License, or FCC Form 405A,
Renewal of Aircraft Station License) can be obtained from the nearest FCC Field Office.
This equipment has been type accepted by the FCC and entered on their list of type
accepted equipment as Honeywell KTR 2280 and must be identified as Honeywell KTR
2280 on FCC Form 605, Aircraft Radio Station License Application.
CAUTION: THE VHF TRANSMITTER IN THIS EQUIPMENT IS GUARANTEED TO
MEET FEDERAL COMMUNICATIONS COMMISSION ACCEPTANCE
OVER THE OPERATING TEMPERATURE RANGE ONLY WHEN A
HONEYWELL CRYSTAL IS USED IN THE STABILIZED MASTER
OSCILLATOR. USE OF OTHER THAN HONEYWELL CRYSTALS IS
CONSIDERED AN UNAUTHORIZED MODIFICATION, AND WILL VOID
THE WARRANTY.
1.7 CONTINUED AIRWORTHINESS INSTRUCTIONS
1.7.1 EQUIPMENT
The instructions for continued airworthiness given in the TC or STC approvals for this
product supplements or supersedes the instructions for continued airworthiness in this
manual.
Most Honeywell products are designed and manufactured to allow "on condition
maintenance". On condition maintenance is described as follows; There are no periodic
service requirements necessary to maintain continued airworthiness. No maintenance is
required until the equipment does not properly perform its intended function. When
service is required, a complete performance test should be accomplished following any
repair action. Consult the appropriate unit Maintenance/Overhaul Manual for complete
performance test information.
14 CFR Part 25.1529 Instructions for Continued Airworthiness is met per the following
instructions:
A. The removal of the equipment is on the condition of failure. There is no re-
quired maintenance