
Bendix/King by Honeywell
KMA 30 Audio Panel and Intercom System
Installation and Operator’s Manual
200-890-5464
Page 1-2
Rev. 1, Aug. 2012
volume knob controls the intercom level for the pilot and copilot, while the large knob controls the pas-
senger intercom volume. Intercom squelch is automatic.
A 3-light, 75 MHz Marker Beacon receiver is integrated in the KMA 30. This provides the necessary
Marker Beacon lights and audio indications necessary for that portion of an Instrument Landing System
(ILS) approach. A pushbutton labeled MKR allows the pilot select high or low sensitivity as well as test
and mute modes.
In the KMA 30, a Bluetooth® wireless interface is available for wireless telephone and music connection.
1.4 APPROVAL BASIS
FAA TSO Approval
.
The KMA 30-series Audio Selector Panels are FAA approved under TSO C50c (Audio Amplifiers) and
TSO C35d (Marker Beacon Receivers), ETSO C50C/ and 2C53d.
All systems comply with relevant portions of EUROCAE RTCA MPS WG No. 7/70, DO-143 and (
Marker
Beacon Receivers
), ED-14C/DO-160C (
Environmental Conditions and Test Procedures for Airborne
Equipment
), ED12B/DO-178B, Level D (
Software Considerations for Airborne Equipment
) and ED-
18/DO-214 (
Audio Systems Characteristics and Minimum Operational Performance Standards for Air-
craft Audio Systems
).
Operation is subject to the following conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired opera-
tion.
1.5 SPECIFICATIONS
TSO COMPLIANCE
Marker Beacon
:
FAA TSO C35d, Class A ETSO 2C35d
Audio Selector/Intercom
:
FAA TSO C50c, Class 1a ETSO C50c
APPLICABLE DOCUMENTS:
RTCA/DO-214 RTCA/DO-143 RTCA/DO-160D
RTCA/DO-178B DO-254
ENVIRONMENTAL Qualifications
:
A1D1CABSMXXXXXXZBABATBXXE2XXX
Operating Temperature Range:
-15º C to 55ºC
Altitude
:
Up to 50,000 feet in an non-pressurized area
DIMENSIONS:
Height: 1.3 in. (3.3 cm) Width: 6.25 in. (16.9 cm)
Depth behind panel 7.15 in. (18.16 cm)
WEIGHT
KMA 30 Unit
Rack with connectors
1.34 lb. (0.61 kg)
0.51 lb. (0.24 kg)
POWER REQUIREMENTS
(Including Internal Lighting):
Voltage
:
11 to 33 VDC
Maximum Current
:
2.5 Amp (Externally protected by a 5A pull-type
breaker)