• Place the All Season Comfort
™
Fan & Heater on a firm, level, open surface free from obstructions and at
least 3 ft. (0.9m) away from any combustible materials. DO NOT use on an unstable surface such as
bedding or deep carpeting. Be sure the heater is not in a position where it may be tripped over by small
children or pets.
• With the product OFF (both the heater and fan on/off buttons will be elevated), plug into a polarized
120V wall outlet.
• DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
• Do not use with any converters or timers.
TO OPERATE THE HEATER MODE:
• Press the red heater On/Off button (
) on the
top, next to the thermostat control, to turn the
heater mode on.
• The power light will illuminate on the front of
the product.
• Turn the thermostat knob clockwise
to turn
up the heat.
• When the room reaches a comfortable temperature, slowly turn the thermostat control counter-
clockwise
until the heater goes off. This is the point at which the thermostat setting equals the
room temperature. At this setting, the thermostat will automatically turn the heater on and off to
maintain this selected temperature.
• Press the red On/Off heater button to turn off and unplug the heater
when you are finished using it.
NOTE: THIS PRODUCT IS EQUIPPED WITH A SAFEGUARD
™
ALERT HEAT
INDICATOR BADGE (FIG. 2). WHEN THE SAFEGUARD
™
ALERT BADGE
LOCATED ON THE GRILL CHANGES FROM BLACK TO RED THE GRILL IS
HOT TO THE TOUCH. DO NOT TOUCH THE GRILL UNTIL THE UNIT HAS
BEEN TURNED OFF AND THE SAFEGUARD
™
ALERT BADGE HAS TURNED
BACK TO BLACK.
USING THE OSCILLATION FEATURE:
Your HZ-0300 All Season Comfort
™
Fan & Heater is equipped with an
oscillation option. If you wish to use this feature, press the oscillation button
(
) and your unit will oscillate side to side. Push the oscillation button (
) again to turn the oscillating
feature off.
SET-UP
OPERATING INSTRUCTIONS
Fig. 1
Fig. 2
Thermostat Control
Fan Control Knob
Oscillation
Button
Heater On/Off Button
Fan On/Off Button
19. Do not operate the product with a damaged cord or plug or if the product malfunctions, is dropped or
damaged in any manner (see warranty).
20. Avoid contact with moving fan parts.
21. Place the product on a dry level surface.
22. Do not operate if the housing is removed or damaged.
23.
SAVE THESE INSTRUCTIONS
HZ-0300_OM.qxd 10/25/06 3:11 PM Page 2
