– 8 –
Disarming and Silencing Alarms
Disarming and Silencing Alarms
Disarming and Silencing Alarms
Disarming and Silencing Alarms
Disarming
•
Security code + [1] OFF
•
The “READY” indicator lights if all zones are secure
•
The keypad emits a single tone to confirm that the system is disarmed.
To Silence a
•
Security code + [1] OFF
Burglary Alarm
•
The “READY” indicator lights if all zones are secure
•
The keypad emits a single tone to confirm that the system is disarmed.
To Silence a
•
Simply press the OFF key
Fire Alarm
•
The “READY” indicator lights if all zones are secure
•
The keypad emits a single tone to confirm that the system is disarmed.
Memory of
•
When an alarm condition occurs, the keypad displays the number(s) of the zone(s)
Alarm
that caused the problem, and displays the type of alarm.
•
To Clear Alarm Display: Security code + [1] OFF again
•
Note the zone in alarm on the keypad display, and make that zone intact (close door,
window, etc.).
•
The message remains displayed even after disarming the system, but can be cleared
with another “disarm” sequence.
IMPORTANT: If you return and the main burglary sounder is on, DO NOT ENTER, but
CONTACT THE POLICE from a nearby safe location.
If you return after an alarm has occurred and the main sounder has shut itself off,
the keypad will beep
rapidly upon your entering,
indicating that an alarm has occurred during your absence.
LEAVE AT ONCE, and CONTACT THE POLICE from a nearby safe location
Using the Keyswitch
Using the Keyswitch
Using the Keyswitch
Using the Keyswitch
GREEN
RED
keyswitch-001-V1
•
Your system may be equipped with a keyswitch for arming and disarming.
•
To arm in AWAY mode:
Turn the key to the right for 1/2 second and release.
Keypads beep twice and the red indicator lights or flashes.
•
To arm in STAY mode:
Turn the key to the right and hold for more than 1
second, then release. Keypads beep three times and the red indicator lights or
flashes.
•
To disarm the system:
Turn the key to the right and release. The red light
turns off.
Green Light:
•
Lights when the system is
disarmed and ready
to be armed (no open zones).
•
If the green light is off, the system is not ready (one or more zones are open).
Red Light:
•
Lights or flashes when system is armed in AWAY or STAY mode. See your
installer for the meanings of the lit red light:
•
Lit Steady = system armed AWAY or STAY and exit delay has expired
•
Flashing = system armed STAY and exit delay timer active
•
Rapid Flashing = an alarm has occurred (memory of alarm)
