- 2 -
View Event Log
1. Press
and then
to select the ‘View Event Log’.
2. Enter
the
Master User Code at the ‘Enter Your Code’ prompt and press
.
3. Press
to move forward or
to move backward through events.
4. To exit, press any key except the
and
keys.
Reboot Keypad
1. Press
and then
to Reboot the keypad. (The keypad beeps and
the LEDs flash for several seconds.)
Set User Codes
1. Press
and then
to select ‘Set User Code’.
2. Enter
the
Master User Code at the ‘Enter Your Code’ prompt and press
to see a user option screen.
Add a User: Press
to select ‘Add a User’.
•
At ‘Enter User No.’ screen, enter a unique two-digit number and press
.
•
At the ‘New User Code’ prompt, enter a new four-digit user code and press
.
Note: Four digit user codes options: 0000 – 9999.
•
The keypad will confirm the User setting and exit the Settings mode:
Confirmation Meaning
Short “ding”
User created successfully
Long “ding”
Error– that user number already has a user code assigned.
No sound
User not created – try again. If necessary, delete the user
and try again.
Delete a User: Press
to select ‘Delete a User’.
•
At ‘Enter User No.’ prompt, enter the desired two-digit number and press
.
•
The keypad will “ding” to confirm the User deletion and exit the Settings
mode.
Assign Attributes: Press
to select ‘Assign Attr.’.
•
At ‘Enter User No.’ screen, enter the desired two-digit user number and press
.
The Assign Attributes menu appears:
1. Authority Level
2. Access Group
3. User Partition
4. RF User Number
5. Pager On or Off
Refer to the system User Guide for assigning the appropriate user settings in the
Assign Attributes Menu.