- 4 -
Disabling Single Button Arming
1. Press and hold down the
and
keys at the same time for 3
seconds. The screen displays the keypad’s address.
2. Press
to move to the USER CODE entry screen
3. Enter
and then press
to exit.
COMMERCIAL STAY MODES
For commercial controls, if Stay Mode 2 is programmed, refer to the
control’s manuals and the table below for Stay mode arming.
+ 1 = Stay Mode 1
+ 2 = Stay Mode 2
= Stay Mode 3 (both Stay 1 and Stay 2 modes)
6162V KEYPAD VOICE FEATURES
Message Center
The keypads feature a voice message center that lets you record and playback
one message.
•
The message can be up to 2.5-minutes long
•
The message remains in the keypad’s memory until a new message is
recorded.
•
The volume control of the message is adjustable.
•
Refer to the procedures below when using the Message Center
functions.
To record a message: Press
+
+
keys. The MESSAGE
ICON (
) will light, indicating recording is in progress.
Note: A message cannot be recorded during the Exit Delay period.
To end recording: Press
key, the keypad will ‘ding’ twice to indicate
recording is ended. The MESSAGE ICON will flash indicating a
message is waiting to be played.
To play a message: Press
+
+
. The recorded message
plays and the MESSAGE ICON turns off. The recorded message will
remain in memory until a new message is recorded.
To adjust the volume: Press
+
+
to adjust the volume
one level. Volume levels are Low, Off, On, High and Medium. With
each level adjustment, the keypad announces “CHECK” (at Low,
Medium and High volumes), “ON” or “OFF” to verify the current setting.
Note: Adjusting the message volume also adjusts status volume. The volume
cannot be adjusted while playing a message.
