BATTERY ACCESS
Battery:
Maxell CR2025, Duracell DL 2025 or
Varta CR2025
Battery Access:
Remove case back by using the blade of
a small screwdriver to pry open. Place
batteries in case back locations (see
diagram).
+ POS END MUST FACE DOWN.
To close, snap case front and back
together.
Important Note: Do not remove
Printed Circuit Board.
REFER TO THE INSTALLATION INSTRUCTIONS FOR THE RECEIVER/CONTROL WITH
WHICH THIS DEVICE IS USED FOR WARRANTY INFORMATION, AND FOR DETAILS
REGARDING THE LIMITATIONS OF THE ENTIRE ALARM SYSTEM.
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
FCC ID: CFS8DL5804
ÊN7674-3OŠ
N7674-3 5/99 Rev. B
/
