4190SN
TAMPER PINS
(SHORTENED WHEN
COVER IS IN PLACE)
MOUNTING
HOLES (3)
BLUE
JUMPER
TERMINAL ASSIGNMENT
1 (+) POLLING LOOP (+)
2 (-) POLLING LOOP (-)
3 (+) LEFT LOOP 1 (+)
4 (-) COMMON (-)
5 (+) RIGHT LOOP 2 (+)
RPM
+
+
RPM
+
- ALWAYS OBSERVE POLARITY.
ALWAYS CONNECT IN PARALLEL.
SEE TEXT FOR WIRE GUAGE AND WIRE LENGTH LIMITS.
-
-
RIGHT LOOP (LOOP 2): FOR N.C. SERIES CIRCUITS
ONLY. USE SEALED (REED) CONTACTS. SEE NOTE 1.
RIGHT LOOP NOT SUPERVISED. SEE UL NOTE 2 BELOW.
LEFT LOOP (LOOP 1): FOR N.C. CIRCUIT (INTERNAL EOLR)
OR N.C. AND/OR N.O. CIRCUIT (EXTERNAL EOLR). SEE
NOTES 2 AND 3. LEFT LOOP SUPERVISED. CLASS B, STYLE B.
SERIAL # ID
4190SN-001-V1
POLLING LOOP - SUPERVISED CLASS B, STYLE 4
CIRCUIT, 25 OHM MAX LINE IMPEDANCE
POLLING LOOP
TERMINALS ON
CONTROL
RED
JUMPER
UL Notes
1.
The 4190SN is designed to meet
the following UL standards:
UL609 Commercial Burglary,
UL864 Commercial Fire, UL985
Household Fire, and UL1023
Household Burglary
2.
The right loop may not be used
for Commercial Fire or UL
Commercial Burglary
installations.
3.
For Commercial Fire usage: Use
N.O. contacts on the left loop.
Supervise (style B) this loop
using Model #EOL100 Fire Listed
10K ohm EOLR.
4.
For UL Commercial Burglary
Usage: Use N.O. or N. C. contacts
on the left loop. Supervise using
the 10K ohm EOLR supplied.
5.
All circuits are power-limited.
6.
For dry indoor use only.
7.
Do not install in air-handling spaces.
Note:
See control panel instructions for
minimum earth ground impedance.
Specifications
Physical:
Width: 2-1/8” (53mm)
Height:
3-1/4” (81mm)
Depth:
1” (25mm)
Electrical:
Voltage Input: 8 – 12VDC
Current Drain: 2mA
Max. Loop Wire Run: 100’
Wire Gauge: 18-22 AWG
Max. Loop Line Impedance: 300 ohm
max.
REFER TO THE INSTALLATION
INSTRUCTIONS FOR THE CONTROL
PANEL WITH WHICH THE DEVICE IS
USED, FOR DETAILS ON LIMITATIONS
OF THE ENTIRE ALARM SYSTEM.
NFPA-72 Compliant
For the latest warranty information,
please go to:
http://www.security.honeywell.com/hsc/r
esources/wa/index.html
ÊN6450-1V1cŠ
N6450-1V1 2/09 Rev. A
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
Copyright
2009
Honeywell International Inc.
www.honeywell.com/security