2 - 2
3.
Select
Use specific IP address
and complete the remaining fields.
•
IP address:
The IP address should be the same as the peer device but can be different as long as
the default gateway is the same as the peer device.
•
Subnet mask:
The subnet mask should be the same as the peer device but can be different from the
peer device as long as the default gateway is the same as the peer device.
•
Default gateway:
The default gateway
must
be the same as the peer device.
4.
Tap
OK
to save.
5.
Press and hold
Red
and
ESC
to warm boot the device. You must warm boot the device to
apply the radio driver change to the operating system.
Initiating an Ad Hoc Connection
You need to set up an ad hoc profile in the SWC.
1.
Tap the icon in the command bar
.
2.
Tap the
Config
tab and tap
New
.
3.
On the Network window, select
Ad Hoc
or
Ad Hoc (WEP)
as the
Assoc Mode
.
4.
In the
SSID
field, enter the static IP address of the peer.
5.
Tap
OK
.
6.
On the Config tab, select the name of the profile (the SSID name) and tap
Activate
to launch the
connection.
Содержание 7850LP-I1-5210E - Hand Held Products Dolphin 7850
Страница 22: ...1 18 ...
Страница 28: ...3 4 ...
Страница 33: ...4 5 DEBUG off Enables debug mode ...
Страница 34: ...4 6 ...
